Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH Basic Settings of VW Lamando Sliding Sunroof Control Unit
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
Basic Settings of VW Lamando Sliding Sunroof Control Unit
Function description:
On VW Lamando, the 09 central electrical device has the active/static DTC: B13C654 sliding sunroof control unit-no basic settings. The function of "04 Basic Settings" needs to
be performed.
Supported products:
Launch PRO or PAD series comprehensive diagnostic equipment
Tested model:
VW Lamando 2016, VIN: LSVCR2BM6GN****** (See the following figure)
Procedure:
1. The 09 central electrical device has the active/static DTC: B13C654 sliding sunroof control unit - no basic settings. (See the following figure.)
2. Choose [04 Basic Settings]. (See the following figure.)
3. Choose [Sunroof]. (See the following figure.)
4. Click [Adjust]. (See the following figure.)
5. The value of the basic setting status is changed to “Finished Correctly”. (See the following figure.)
6. The DTC status changes from "Active/Static" to "Passive/Sporadic". (See the following figure.)
7. After DTC clearing, the 09 central electrical device has no DTC. (See the following figure.)
