LAUNCH Ford Kuga AWD Programmable Module Installation 2008

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

Ford Kuga AWD Programmable Module Installation Guide

Model:

2008 Kuga

Operation:

Replace the AWD module and input data manually

Conditions and Requirements:

The communication is normal, and battery voltage stable

Software Version:

Ford V48.50 or above

Product requirement:

X431 PRO series, PAD series products.

Operation Steps:

1. Enter “Ford” software and choose “Auto Search”.

2. Confirm the vehicle specification, and choose “Yes”.

3. Select “Module Programming”.

4. Select “Programmable Module Installation”.

5. Select “AWD(All Wheel Drive”.

6. Whether the original mode still available? If we have removed it, please select “No”.

7. Read the tips carefully, select “manual” when we have replaced by a new module or original module not available.

8. Input the VIN code on Ford OEM website to query the original factory data, find the corresponding section of ‘761-01-01’ and manually enter the data in turn