Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH Toyota mechanical key matching
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
Operation instructions for Toyota Anti-Theft function
Features：
Anti-Theft Box Reset (All Keys Lost)
Required devices：
PRO and other Android devices of 431 products
Required
software：Toyota V10.01
Steps：
For Toyota Immobilizer, the following is a detailed introduction to the method of
All Keys Lost for mechanical 72 chip keys.
1. Enter the software, and select,【System mode】
2. Select 【Immobiliser (Immobilizer Programming)】
3. Select 【Type 5 (with G 72)】
4. Select 【Anti-theft Box Reset (All Keys Lost)】
5. If the Anti-theft Box has been reset or replaced with a new one, there will be the
following prompts, as shown below
6. The following is the process of All Keys Lost, follow the prompts.
7. Perform the following operations according to the type and quantity of keys you want to match. You can operate on this interface. Click “ OK ” after the operation completed, which is to prevent the key matching failed caused by you don’t remember the operation procedure after exiting by clicking “OK”
8. Finally, you can test whether the key is normal by starting the vehicle.