top of page

How To Guide:

Source: LAUNCH TECH CO LTD

LAUNCH TPMS 2018 Cadillac XTS Tire Pressure Sensor Learning Operation Guide

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk.  We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide.  Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them.  We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

Function description:

Tire pressure sensor learning guide after tire pressure sensor replacement


Using tools：

CRT 511S (This operation takes CRT 511S as an example. For the specific operations about other tire pressure devices of Launch, you can

refer to this method.)


Model information:

2018 Cadillac XTS


Sensor OE number：

(Schrader)13598772


Fault description：

The tire pressure light on the instrument panel is on, and the pressure value of the left rear wheel is 0 Kpa. The actual pressure is normal (as shown in the following figure);

Procedure:

1. Activate the four sensors on the vehicle in sequence according to the corresponding positions, and it is found that the left rear wheel cannot be activated, indicating a fault with the left rear tire pressure sensor. (As shown in the figure below)

2. Return to the main page and click on [Program Sensor]. The device automatically creates a new ID and installs the programmed LTR-Sensor into the left rear wheel. (As shown in the figure below)

3. Return to the Home screen and select [Relearn] (As shown in the figure below)

4. Prompt to save activated data? Click OK to keep (as shown in the following figure)

5. This page can activate the sensor. If you need to modify it, you can reactivate it. After confirming that there are no errors, click the confirm button. (As shown in the figure below)

6. This page cannot modify the activation information. After confirming that there are no errors, click the confirm button. (As shown in the figure

below)

7. The device indicates that the sensor has successfully learned. (As shown in the figure below)

8. After successful learning, the tire pressure light will turn off and the air pressure value will display normally. (As shown in the figure below)


bottom of page