Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH TPMS Geely Atlas 2017 Tire Pressure Sensor Learning Guide
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
Function description:
Replace the tire pressure sensor to learn the operation guide
Use tools:
CRT511S (This operation takes CRT511S as an example, the specific operation of other tire pressure equipment can refer to this method)
Model information:
2017 Geely Atlas
Sensor OE number:
(Dias) 01725271
Fault description：
Instrument tire pressure light, left rear wheel pressure value shows 0bar (as shown below);
Procedure:
1. Activate the four sensors in the corresponding position sequence. If the left rear tire cannot be activated, determine that the left rear tire pressure sensor is faulty, as shown below.
2. Back to Home Point Program Sensor, the device automatically creates a new ID and installs the programmed tire pressure sensor into the wheel, as shown below.
3. Return to the home screen to select the sensor, as shown below.
4. Ask whether to save the activated data. Click OK to save, as shown below.
5. The sensor can be activated on this page. If you need to modify it, you can reactivate it, as shown below.
6. The activation information cannot be modified on this page. After confirming the error, click the Confirm button, as shown below.
7. The device displays a message indicating that the sensor has learned successfully, as shown below.
8. After learning successfully, the tire pressure lamp of the instrument is turned off and the tire pressure value is displayed normally, as shown below.
