Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH TPMS Hyundai Santa Fe 2017 Tire Pressure Sensor Learning Operation Guide
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
Function description：
Tire Pressure Sensor Learning Operation Guide
Using tools：
CRT 511S (This operation takes CRT 511S as an example, and specific operation methods for other tire pressure equipment of LAUNCH can refer to this method).
Model information:
2017 Hyundai Santa Fe
Sensor OE number：
(Continental) 52933D4100
Fault description：
The tire pressure light on the instrument panel is on, and the left rear wheel pressure value displays 0 bar, as shown in the figure below.
Procedure:
1. Activate the four sensors on the vehicle in sequence according to the corresponding positions, and it is found that the left rear wheel cannot be activated, indicating a fault with the left rear tire pressure sensor, as shown in the figure below.
2. Return to the main page and click on [Program Sensor]. The device will automatically create a new ID and install the programmed LTR-Sensor into the left front wheel, as shown in the figure below.
3. Return to the Home screen to select [Relearn], ss shown in the figure below.
4. Prompt to save activated data? Click OK to keep (as shown in the following figure)
5. This page can activate the sensor. After confirming that there are no errors, click the confirm button. (As shown in the figure below)
6. The activation information cannot be modified on this page. Once confirmed, click the confirm button. (As shown in the figure below)
7. The device indicates that the sensor has successfully learned, as shown in the figure below.
8. After successful learning, the tire pressure light will turn off and the air pressure value will display normally, as shown in the figure below.
