Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH TPMS KIA Sportage 2020 Tire Pressure Sensor Learning Operation Guide
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
Function description：
Tire Pressure Sensor Learning Operation Guide
Using tools：
CRT 511S (This operation takes CRT 511S as an example, and specific operation methods for other tire pressure equipment of LAUNCH can refer to this method)
Model information:
2018 KIA Sportage
Sensor OE number：
(Continental) 52933D9100
Fault description：
The tire pressure light is on, and the instrument panel displays a right front wheel pressure value of 0, as shown in the figure below.
Procedure:
1. Activate the four sensors on the vehicle in sequence according to the corresponding positions, and it is found that the right front wheel cannot be activated. It is determined that the right front tire pressure sensor is faulty, as shown in the figure below.
2. The device automatically creates a new ID and installs the programmed LTR-Sensor into the right front wheel, as shown in the figure below.
3. Return to the main page, select [Relearn], and follow the prompts to proceed to the next step, as shown in the figure below.
4. The device prompts that the sensor has successfully learned, the activation ID is consistent with the OBD ID, and the new ID is written successfully entered, as shown in the figure below.
5. After successful learning of the sensor, the tire pressure light on the instrument panel goes out and the tire pressure display is normal, as shown in the following figure.
