LAUNCH VW Basic Electromechanical Parking Brake Control Unit Settings Golf 2015

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

VW Basic Electromechanical Parking Brake Control Unit Settings Golf 2015

Tested models:

Volkswagen Golf 2015

Volkswagen Golf fault code:

C10E254 electromechanical parking brake control unit-no basic settings, need to perform this function.

Issue description：

Electronic parking brake failure, as shown below:

Operation Guide:

1. X-431 remote diagnosis, read the fault code of 03 brake electronic device as follows; C10E254 electromechanical parking brake control unit-no basic setting, the state is active/static, the fault code cannot be cleared

2. Select "04 Basic Settings" option.

3. Select "Electric-mechanical parking brake function test"

4. Click "Adjust" option

5. The basic setting status is running

6. Read the fault code of 03 brake electronic device as follows: C10E254 electromechanical parking brake-no basic settings, the state is Passive/Abiogenesis