Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH VW Brake System Bleeding Tiguan 2011
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
2011 Shanghai VW Tiguan ABS Pump Bleeding Method
Product Model
X-431 Series
Vehicle Coverage:
Shanghai VW Tiguan, 2011, VIN=LSVUC65N9B26*****
Prerequisites:
1) If the vehicle is equipped with the M/T, depress and release the clutch pedal.
2) Vehicle is stationary.
3) The parking brake is applied.
4) For M/T, the gear lever is in N gear.
5) For A/T, the gear lever is in P gear.
Procedure:
1). Choose Shanghai VW V27.80 or a later version.
2). Choose VW GM System.
3). Choose System Selection.
4).Choose 03 Brake System.
5).The 03 brake system information is displayed.
6).Choose 04 System Basic Adjustment.
7).Choose Read by List.
8).Choose "001, brake system bleeding" and click OK.
9).Depress and hold the brake pedal, and click Adjust.
10).The information "Please wait (10s)" is displayed. Click Adjust.
11).The information "Release pedal" is displayed. Click Adjust.
12).Perform bleeding in the order from long pipe to short pipe. Here, first loosen
the RR wheel bleed bolt and click Adjust.
13).The information "Please wait (10s)" is displayed. Click Adjust.
14).The information "Tighten bleed bolt" is displayed. Click Adjust.
15).Repeat steps 8 to 13 to bleed the RL, FR, and FL wheels separately until no air flows out of the bleed bolt. The brake system becomes normal and the process ends.