How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH VW Injector Programming
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
VW Injector Programming
We have a VW Golf, VIN: VINLWVGZZZ7LZ700*****, need to do injector programming.
1. Write down the number of the injector correctly, like don’t mix one with letter “L”, zero with letter “O” and other normal mistake.
2. Enter Local diagnose and find VW.
3. Enter VW software and choose System Selection, find “01 Engine Control Module 1” system.
4. Enter “01 Engine Control Module 1” system , the scanner will read ECU memory, and you need to record or print the information on this page which is useful for you to query after-market service center.
5. After record the ECU information, please click “OK” to continue.
6. Choose “Long Adaption” on this page.
7. Choose read by List.
8. After you choose read by list, it will list all the items can be programmed out. You need to choose the one which you want to programmed.
1) Speed Limiter.
2) Immobilizer
3) Injectors, DPF replacement and others.
9. Select the injector which you need to programming, here we chose 074 injector Calibration (Cylinder 4).
10. Then we arrived this menu,
Select input Value, and input the correct number of the injector and click OK.
Click “save” at the bottom.