Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH VW Tiguan 2017 76 Parking Aid System Online Parametric Configuration
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
VW Tiguan 76 Parking Aid System Online Parametric Configuration
Function description:
The 76 parking aid system of VW Tiguan has the following DTC: B200500 Data Record Invalid. It is necessary to perform the online parametric configuration function.
Supported products:
Launch PRO3S+V2.0, PRO3S+V3.0, PRO3S+V5.0, PADIII, PADV, PADVII, and other diagnostic equipment that support the online parametric configuration” function
Tested model:
VW Tiguan 2017, VIN: LSVUC20T9H2******(see the following figure)
Procedure:
1. Save the fault report. The 76 parking aid system has the following DTC: B200500 Data Record Invalid. (See the following figure.)
2. Choose [Online Function]. (See the following figure.)
3. Choose [Online Parametric Configuration]. (See the following figure.)
4. Read the disclaimer carefully and click OK. (See the following figure.)
5. Choose [76 Parking Aid] and click [Click To Reprogram]. (See the following figure.)
6. Four optional files are displayed. (See the following figure.)
7. Choose the first optional file and click OK. (See the following figure.)
8. Turn off the ignition switch, wait for 30s, and then turn on the ignition switch. Then, click OK. (See the following figure.)
9. Compare the data before and after update. (See the following figure.)
10. The DTC B200500 Data Record Invalid is cleared. (See the following figure.)
