top of page

How To Guide:

Source: SmartSafe

SmartSafe ADAS Citroen JUMPY K0 Vehicle Distance Assist Dynamic Calibration

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk.  We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide.  Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them.  We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

Function Description:


The rear radar needs to be calibrated in the following situations


  • There are fault codes in the radar system "Radar inaccurate, calibration missing"

  • Damage to the front bumper

  • Radar controller has been removed and installed or replaced



Measured model:

JUMPY K0


Operation guide:


1. Automatically identify and enter through ADAS calibration entrance VIN.



2. Select ADAS Calibration.



3. After automatically recognizing the JUMPY K0 model, select ADAS System Select, click Lane Wandering Alert, and enter the system.





4. Select the path Special Function->ECU Replacement, click to execute the function.




5. Appear Prompt, click YES.



6. According to the prompt, click OK when you are ready.



7. According to the prompt, click OK when you are ready.



8. Dynamic calibration in progress...





9. Adjust the screw according to the information in the help picture, and repeat the calibration until it is successful.



bottom of page