SmartSafe ADAS Mercedes-Benz ML300 Radar Calibration

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

Functional description

When calibration is required:

① Replaced the distance control system (DISTRONIC) electric control unit ECU.

② Lost calibrated or uncalibrated DTC appears.

Precautions

① Choose a flat section of road and drive straight.

② Keep a distance of 70 m from the vehicle ahead.

③ There are fewer targets ahead, Going through the tunnel may delay the calibration process.

Operation steps

1. Turn on the ignition switch of the car, connect the diagnostic equipment, select the Mercedes-Benz model software, V49.60 and above, and enter the following menu interface.