Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: SmartSafe
SmartSafe ADAS PEUGEOT EXPERT K0 Vehicle Distance Assist Dynamic Calibration
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
Function Description:
The rear radar needs to be calibrated in the following cases:
① Radar system with DTC "Radar out of alignment, calibration missing".
② There is damage on the front bumper.
③ The radar controller has been removed and installed or replaced.
Measured models:
EXPERT K0
Operation guide:
1. Automatically identify and enter through ADAS calibration entrance VIN.
2. Choose "ADAS Calibration".
3. After the "EXPERT K0" model is automatically recognized, select "ADAS System Select" and click "Lane Wandering Alert" to enter the system.
4. Select the path Special Function->ECU Replacement, click to execute the function.
5. Appear prompted, click "YES".
6. According to the prompt, click "OK" when you are ready.
7. According to the prompt, click "OK" when you are ready.
8. Dynamic calibration is in progress...
9. According to the picture information, adjust the screw and repeat the calibration until it is successful.
