Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: SmartSafe
SmartSafe ADAS RENAULT CLIO V Rear Radar Dynamic Calibration
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
Function Description:
The rear radar needs to be calibrated in the following cases:
① DTC "radar out of alignment, calibration missing" for the left or right rear radar system.
② Damage to the front bumper.
③ The left rear radar or right rear radar controller has been removed and installed or replaced.
Measured models:
CLIO V
Operation guide:
1. Automatically identify and enter through ADAS Calibration entrance VIN.
2. Choose "ADAS Calibration".
3. Select "ADAS System Scan" to automatically recognize the "CLIO V" model.
4. After selecting "ADAS System Select", click "ACC Left Rear Side Radar".
5. Select "Rear Side Radar Adjustment", and click "OK" when prompted.
6. Wait 3 seconds for the calibration interface to appear.
7. Click the "Help For Parameter", and the execution condition prompt will appear.
8. Follow the "Help For Parameter" prompts until the calibration success prompt appears.
