Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: SmartSafe
SmartSafe ADAS RENAULT ESPACE V Front Radar Dynamic Calibration
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
Function Description:
The front radar needs to be calibrated in the following cases:
① The front radar system has a fault code "radar out of alignment, calibration missing".
② Damage to the front bumper.
③ The front radar controller has been removed and installed or replaced.
Measured models:
ESPACE V
Operation guide:
1. Automatically identify and enter through ADAS calibration entrance VIN.
2. Choose "ADAS Calibration".
3. Select "ADAS System Scan" to automatically recognize the "ESPACE V" model.
4. After selecting "ADAS Calibration Function", click "ACC Radar Calibration".
5. Select "Front Radar Adjustment", and click "OK" when prompted.
6. Follow the prompts, and click "OK" after the operation is complete.
7. Follow the operation, after completing the prompts, click the "OK" button to execute the calibration function.
8. Click the "Help For Parameter", and the execution condition prompt will appear.
9. Follow the prompts, click the collection button several times until enough data is collected, and the prompt appears.
10. Click "OK", and the new data flow interface appears.
11. Click "Next", the radar calibration angle results will appear, click "Help For Parameter" to check whether the angle calibration is successful.
