top of page

How To Guide:

Source: SmartSafe

SmartSafe ADAS RENAULT KADJAR Front Camera Calibration

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk.  We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide.  Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them.  We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

Function Description:


The front camera needs to be calibrated in the following cases:

(1) The vehicle has the following failure records (no or wrong basic settings/adaptation)

①Camera not calibrated or incorrectly calibrated.

(2) Vehicle parts are overhauled and replaced as follows:

① Replace the controller.

② Removed and reinstalled or replaced windshield.

③ Updated one of the vehicle height sensors for the height control system.


Measured models:

KADJAR


Operation guide:


1. Automatically identify and enter through ADAS calibration entrance VIN.



2. Select "ADAS calibration".



3. Select "ADAS System Scan" to automatically recognize the "KADJAR" model.



4. After selecting "ADAS Calibration Function", click "Front Camera Calibration".



5. Select "Front Camera Calibration", and click "OK" when prompted.




6. Follow the prompts, and click "Next Step" after the operation is complete.



7. Follow the prompts, and click "Next Step" after the operation is complete.



8. Follow the prompts, and click "Next Step" after the operation is complete.



9. Follow the prompts, and click "Next Step" after the operation is complete.



10. Follow the prompts, and click "Next Step" after the operation is complete.



11. Follow the prompts, and click "Next Step" after the operation is complete.



12. Follow the prompts, and click "Next Step" after the operation is complete.



13. Follow the operation, after completing the prompts, click the "OK" button to perform the calibration function.



14. A "waiting interface" appears.



15. Wait for about 20 seconds, the camera calibration is completed, and the camera angle interface appears.



16. Click "OK", a prompt shows that the calibration is successful.



bottom of page