Super EL50448 Auto TPMS Sensor Reset Tool for Ford & GM

***For GM series vehicles***

1. Make the gear in P position.
2. Use cruise to choose TPMS re-learn mode in the dashboard settings.
3. Horn will ring once and TPMS indicator flashes, then learning mode has been entered successfully. If equipped, the message center will display the front left (LF) tire.

***For Ford series vehicles***

1. Make the gear in P position.
2. Ignition switch to OFF, press and release the brake pedal.
3. Turn ignition switch from OFF position to RUN position 3 times and end at RUN position.
4. Depress and release the brake pedal.
5. Ignition to OFF position.
6. Ignition goes from OFF position to RUN position 3 times and ends at RUN position.
7. Horn will ring once and TPMS indicator flashes, then learning mode has been entered successfully. If equipped, the message center will display the front left (LF) tire.

Require 1x Pcs 9V battery to work with tpms activation tool.

1. Set the car in TPMS learning mode. (car horns twice)
2. Starting relearn process from left front tire, point antenna on correct position. Press & release power button. Once the speaker chirped, move to the next tire.
3. Follow this order to rest TPMS sensors: Front left, front right, rear right, rear left.
4. After all sensors reseted, the car horns twice means TPMS re-learn finished.

>>Hold power button for 5 seconds and 2 LEDs flashing 2 times, selected brand’s LED flashing 2 times.
How to detect which mode the device in?
>>Press power button, if Green LED flashing means tire reset tool in GM mode, if Yellow LED flashing, means Super EL50448 in Ford mode.