top of page

Microtronik Autohex II BMW Professional Programming

BMW Technicians who are looking for a reliable tool that solve all their Ecu programming and coding (AHX0004)

SPECIAL ORDER

Will be invoiced in NZ$, cost + shipping in NZ$ will be confirmed upon request.

Important Additional Subscription Required:

Autohex II Annual Fee of US$750 for BMW software.

This includes:

  • Access to Online Programming functions

  • Software update

  • Extended Hardware warranty & Technical support

  • Only with Autohex: Read ISN in G Series: 

    MD1 and MG1 (MDG1) ISN Reading of following DME/DDE (writing is possible for some DMEs): DME_840, DME_840H, DME_84T0, DME_860, DME_86T0, DME_880, DME_88T0, DDE803P, DDE832C

    Only with Autohex: Read and Write ISN in MD1 and MG1 F Series: 

    MD1 and MG1 (MDG1) ISN Reading of following DME/DDE: DME_83T1, DME_840, DME_841, DME_841H, DME_861, DME_88T0, DDE803

    Read and Write All ISN in F Series: 

    Autohex II reads and writes all ISN of DME/DDE in F series: EDC17C41, EDC17C41, EDC17C50, EDC17C56, EDC17C76, EDC17CP09, EDC17CP45, EDC17CP49, MEVD17.2, MEVD17.2.3, MEVD17.2.4, MEVD17.2.5, MEVD17.2.6, MEVD17.2.8, MEVD17.2.9, MEVD17.2.G, MEVD17.2.H, MEVD17.2.P

    Read and Write All Long ISN in E Series: 

    Autohex II reads all ISN of DME/DDE in E series: EDC17C06, EDC17C41, EDC17C50, EDC17C56, EDC17C76, EDC17CP02, EDC17CP09, EDC17CP45, EDC17CP49, MSV80, MSV80.1, MSD80, MSD81, MSD85, MSD85Y, MSS60, MED17.2, MEV17.2, MEV17.2.2, MEVD17.2, MEVD17.2.2, MEVD17.2.7, MEV1746, MEVD17.2.4, MEVD17.2.5, MEVD17.2.9

    Read most of old ISN in E Series: 

    Autohex II reads the ISN of DME/DDE in E series: EDC16C1, EDC16C31, EDC16C35, EDC16CP35, ME9, ME9.2, ME9.2.2, MEV9.2, MSV70, MS45

    Individual Programming for any Ecu (DOIP Protocol) 

    Autohex II is the most advanced tool for BMW Ecu programming, it supports E series, F Series and G Series

    CAS1, CAS2, CAS3, CAS3+, CAS4 and CAS4+ ISN 

    With Autohex II you can read and write ISN from all CAS versions in E and F series

    Read ISN from all Trciore DME/DDE by boot mode 

    This function is important when the DME/DDE is not responding, and you need the ISN for replacment

    BMW E series EGS ISN matching with CAS 

    You can reset EWS security from all BMW E series EGS by OBD

    BMW F series EGS EWS Reset for 6HP and 8HP models 

    You can reset EWS in EGS 6HP (On Bench) and 8HP by OBD or On Bench

    BMW E series, F series, and G series Auto Coding 

    Autohex II calculates the required coding data automatically from the car vehicle order, then it applies these data to the target module

    Manual Coding in E Series and F Series 

    You can modify the Ecu coding to add and remove features in any Ecu in BMW cars

    Managing the Vehicle Order (FA) in BMW cars 

    You can modify the Vehicle Order to do retrofit the configuraion. You can also backup and restore the FA from the backup Ecu

    Unlock Security from CAS4, CAS4+, FEM and BDC 

    You can unlock secrity of CAS4/4+, BDC and FEM to able to:

  • Change CAS and BDC and FEM VIN

  • Change CAS and BDC and FEM ISN

  • Mileage Reset for CAS and BDC and FEM

  • Making a key for CAS and BDC and FEM (not supported in this package)

  • Read and Write ISN on Bench for MSX8X 

    With Autohex II you can read ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the Ecu.

bottom of page